Real Estate Information

Dan Groteboer's Blog

Dan Groteboer

Blog

Displaying blog entries 11-20 of 61

Boys & Girls Club of Rochester - The Positive Place For Kids

by Dan Groteboer

Be Green. Be Giving. Be Doubled. Be Great.

 

Helping Kids BE-lieve

Looking back at the growth of the Club there is one constant that threads through every year, every day, every hour; Boys & Girls Club is here. We provide over 1,700 hours each year for youth who need a place to go after school; a place to find a caring adult to be their counselor, their life guard, their tutor, their mentor; a place that provides a sense of stability; a place that provides each youth a positive environment where basic needs are met. — Larry Kent, Executive Director, Boys & Girls Club of Rochester

Click here to hear about how the Club helps kids to BE-lieve...

 

This e-campaign will help the Club "go green" and allow stewarding of resources more efficiently. Boys & Girls Club's e-campaign is one component of its KidStock fundraiser, striving to help all kids Be Great.

The e-campaign allows community members to donate online TODAY thru July 31st! During that time, Think Mutual Bank will match dollar for dollar all online donations up to $20,000!! Throughout the overall KidStock campaign, Think Mutual Bank will match every donation up to $40,000.

"We're confident that our full pledge to this campaign will be matched and ultimately donated to the Boys & Girls Club to help them meet the needs of kids in the Rochester area," said Paul Mackin, Think Mutual Bank's President and CEO. "The Boys & Girls Club is one of many organizations we support because of its positive impact in this community. They do a great job of helping the youth in our area reach their full potential. We're very proud to be a supporter and partner."

Help all kids Be Great by supporting Boys & Girls Club of Rochester programs and services by giving online. Donate Now



Your privacy is very important to us.
If you no longer wish to receive this newsletter, simply use the link below to unsubscribe. Unsubscribe Me

Questions About The Tax Credit

by Dan Groteboer

Here is a great source for questions about the Tax Credit.

Many of you have been asking questions.

Here is a great place to look.

http://www.federalhousingtaxcredit.com/

Feel free to give me a call if you have any questions.

Surges Happen! How To Protect the Appliances In Your Home

by Dan Groteboer

Surges Happen! How To Protect the Appliances In Your Home

The power you get from the wall outlet is known as "120 volts AC power." The power companies try to keep that voltage uniform. Lightning, short-circuits, poles knocked down by cars, or some other accident can make the voltage jump to hundreds, even thousands of volts. This is what engineers call a "surge." A surge will last only a few millionths of one second (the "blink of an eye" is thousands of times longer than the typical surge). It is enough to destroy or to upset your appliances.

What can a surge do to your appliances?

Your appliances are designed to run on the normal 120 volts AC supply, with some tolerance for more or less, but they can be damaged, or their controls can be upset by surges. The result is then frustration and repair bills, and even a fire in rare cases.

Disturbances

Normal - This is the voltage that we all take for granted, every second of the minute, every minute of the hour, every hour of the day, every day of the year. But occasionally, for a short time...

The voltage falls below normal: a sag. Sags are unlikely to damage most appliances, but they can make a computer crash, confuse some digital clocks and cause VCRs to forget their settings.

The reverse of a sag is called a swell: a short duration increase in the line voltage. This disturbance might upset sensitive appliances, and damage them if it is a very large or very long swell.

Noise is a catch word sometimes used to describe very small and persistent disturbances. These do not have damaging effects but can be a nuisance.

There is, of course, the ultimate disturbance: an outage -no voltage at all!

These disturbances are different from surges, but they should be mentioned because the remedies are generally different. As we will see later, some available devices can help overcome both sensitive appliances in your home.

Your home contains all sorts, types or kinds of appliances. These not only include the traditional household helpers, but also the entertainment electronics, the family's computer(s), smart telephones, control systems (thermostats, garage door, etc.), and all the new things to come.

More and more, traditional large appliances in your home depend on very sophisticated electronics for their control. This can often make them sensitive to surges (as well as power interruptions).

To help sort out which types of your appliances might be damaged or upset, you can describe them in general terms depending on their connections: power, telephone, cable, or antennas. Each of these connections offers a path for a surge to come in, something that might be overlooked when the cause of damage is explained as a "power surge."

The first type includes electronics that are connected only to the power, such as a computer with no modem, a TV set with rabbit ears, a VCR not connected to cable TV, a table-top radio, a microwave oven, etc. Surge protection of these is not particularly difficult, and quite often it is already built-in by the manufacturer.

The second type, for which more protection might be needed, includes electronics that are powered, of course, from your power receptacles but also connected to an external communications system: telephone, cable TV, satellite receiver. A slightly different but similar situation, which also needs attention, is that of appliances connected to a household control system such as garage door opener, intrusion or fire alarm, automatic sprinklers, or intercom.

We will see later why the two kinds of appliances face different risks of being damaged and consequently might require different protection methods.

Where do surges come from?

There are two origins for the surges that occur in your power system: lightning surges and switching surges.

Lightning surges, occur when a lightning bolt strikes between a cloud and objects on earth. The effect can be direct --injection of the lightning current into the object, or indirect --inducing a voltage into electrical circuits.

We will look at ways of protecting your appliances against lightning surges that come by way of the wires -power, telephone, cable, etc. Protection of the house against the direct effects of lightning is done by properly grounded lightning rods. Note also that lightning rods are intended to protect the structure of the house and avoid fires. They do not prevent surges from happening in the wiring.

Direct lightning effects are limited to the object being struck and its surroundings, so that the occurrence is considered rare but it is nearly always deadly for persons or for trees. Well-protected electrical systems can survive a direct strike, perhaps with some momentary disturbances from which they recover (blinking lights and computers restarting during a lightning storm). The key word, of course, is "well-protected" and this information will help ensure your home has a well- protected electrical system.

Indirect lightning effects are less dramatic than from a direct strike, but they reach further out, either by radiating around the strike, or by propagating along power lines, telephone system and cable TV. From the point of view of the home dweller, unwanted opening of the garage door, or a surge coming from the power company during a lightning storm, would be seen as indirect effects.

Switching surges occur when electrical loads are turned on or off within your home, as well as by the normal operations of the power company. An analogy often given is the "water hammer" that can occur in your piping if a faucet is turned off too quickly: the electric current flowing in the wires tries to flow for a short time after the switch has been opened, producing a surge in the wiring, just like the surge of pressure in the piping.

How often, how far, how severe?

So, surges can and do happen!

These questions -how often do surges occur, how far do they travel before hitting your appliances, how severe are they - must be answered, as well as possible, so that you can proceed to the next step of taking calculated risks or making a reasonable investment by purchasing some additional protection. There are several ways of getting surge protection, from the simple purchase of a plug-in device from an electronic store, to the installation of protective devices for the whole house, to be done by an electrician or the power company.

How often?

You are probably best placed to answer that question if you have lived in your neighborhood for several years. Lightning is random but can strike more than one time at the same place. There are now sophisticated means to record the occurrence of individual lightning strikes; electric utilities and businesses seek the data to make decisions on the risks and needs for investing in protection schemes. The reason for mentioning "several years in your neighborhood" is that the frequency of lightning strikes varies over the years and the section of the country where you live.

How far, how severe?

The answers to these two questions are linked: a nearby lightning strike has more severe consequences than an equal strike occurring farther away. There is also a wide range in the severity of the strike itself, with the very severe or very mild being rare, the majority being in mid-range (a current of about 20,000 amperes for a short time) -but still much shorter than the blink of an eye.

Calculated risk or insurance?

The trade off:

A large stack of dollar bills and some change to replace your unprotected computer, if and when a lightning or some other surge destroyed it ...

... or use a small number of bills to purchase a "surge protector" for peace of mind and effective protection.

If you look at it from that point of view, the choice is probably easy and, most likely, you will be looking for one of those "surge protectors" -or some device with a similar name to do the same job, as explained next.

What's in a name?

When you walk in the computer store or electronic supply store, you might ask for something to protect your appliances against surges, but what to call it ? The devices that can protect against surges are called "surge-protective devices" by engineers, but that sounds too much like jargon to some people.

One name that seems to stick is "surge suppressor" with a variety of trademark names. The Underwriter's Laboratories chose to call them "Transient Voltage Surge Suppressor" and you might find that name or the TVSS acronym next to the listing on the product. Always make sure that the product has been tested by a product safety testing organization, such as UL, ETL, or CSA, as indicated by their labels.

You cannot really suppress a surge altogether, nor "arrest" it (although your utility uses devices they call "surge arresters" to protect their systems). What these protective devices do is neither suppress nor arrest a surge, but simply divert it to ground, where it can do no harm.

Decisions, decisions

Surge protectors come in many shapes and forms for many purposes, not just the plug-in kind that you find in the electronic stores. There are several ways to install them on your power supply: plug and play, do-it-yourself, hire a licensed electrician to do it, or even call on your power company to do it. Here is a run down on your options, and who does it:

  • Purchase one or more plug-in surge protectors
  • Install a surge protector at the service entrance panel
  • Have the power company install a surge protector next to the meter

Plug-in surge protectors

This is the easiest solution, and there are a wide variety of brands available in the stores. These come in two forms: a box that plugs directly into a wall receptacle, or a strip with a power cord and multiple outlets. Depending on the appliance, you will look for a simple AC power plug-in, or a more complex combined protector for AC power and telephone or cable. However, before you purchase the right protector for the job, you should think about some details.

There is another decision to make, concerning how a surge protector will power your appliance if the protective element should fail under extreme cases of exposure to a large surge or large swell. Most surge protectors are provided internally with some kind of fuse that will disconnect in case of failure. However, this disconnect can operate in two different ways, depending on the design of the surge protector: some will completely cut off the output power, others will disconnect the failed element but maintain the power output.

Quit and be protected or continue?

For you, it is a matter of choice: would you want to maintain the output power to your appliance -but with no more surge protection? Or would you rather maintain protection for sure -by having the circuit of the protector cut off the power supply to your appliance, if the protective function were to fail? To make an intelligent decision, you must know which of the two possibilities are designed into the surge protector that you will be looking for.

What are the lights telling you?

To help the consumer know what is going on inside the surge protector, many manufacturers provide some form of indication, generally by one or more pilot lights on the device. Unfortunately, these indications are not standardized, and the meaning might be confusing, between one, two - even three or four lights -where it is not always clear what their color means. Read the instructions!

More decisions ...

So far, we have looked mostly at the plug-in surge protectors because they are the easiest to install and they do not require the services of an electrician. The two other possible locations for surge protectors are the service panel (breaker panel) and the meter socket.

Service-panel surge protectors

Instead of using several plug in protectors -one for each sensitive appliance is sometimes recommended -you can install a protector at the service panel of the house (also called "service entrance" or "breaker box"). The idea is that with one device, all appliances in the house can be protected, perhaps with a few plug-in protectors next to the most sensitive appliances. There are two types of devices available: incorporated in the panel, or outside the panel.

Some breaker panel manufacturers also offer a snap in surge protector, taking the space of two breakers (assuming that there are blank spaces available on the panel), and easily installed by the home owner or by an electrician. However, there are two limitations or conditions to that approach:

The snap in protectors generally fit only in a breaker panel from the same manufacturer -possibly down to the model or vintage of the panel.

To install the snap in protector, you must remove the front panel (do turn off the main breaker before you do that). Most cities have codes allowing the home owner to do it, under some conditions. Check with your local authorities to find out if they allow you to do that, or hire a licensed electrician to do the installation for you. There are other surge protectors packaged for wiring into the service panel, either within or next to the panel. That kind of installation is best left to a licensed electrician.

At the meter socket

There might be a possibility that the power company in your area offers, as an option, to install a surge protector with a special adapter, fitting it between the meter and its socket (the dark band in the bubble of the picture). But that type of device and installation is out of the question as a do-it-yourself project, and will require cooperation from the power company, if they do offer the program.

Other types of outdoor surge protectors can be installed near the meter. That kind of installation must be done by a licensed electrician.

Check list

Before you decide which way you want to protect your appliances, there are other points to consider.

Where do you live?

This is an important question because the type of dwelling has some effect on how severe your surge problem might be. In a somewhat simplified way, consider three categories according to the arrangement of the utilities:

  • Detached house with power and telephone and/or cable TV drops at opposite ends of the house -the worst possible arrangement of all. But do not fret, there is a way of compensating, even after the fact, for this unfortunate situation, as we will see.
  • Detached house with all services (power, cable TV, phone) entering on the same side of the house.
  • Townhouse or apartment building with services entering the building at one point and fanned out to the different dwellings - about the same as the case of the detached house with all services on the same side.

What appliances are you using?

From the surge protection point of view, there are four kinds of appliances, with examples listed below by order of increasing sensitivity to surges, either because of their nature or because of their exposure:

  • Motor-driven and heating appliances
    Washers (dish and clothes), food processors, power tools, heating and ventilation motors, pumps, etc.
    Water heaters, space heaters, toasters, incandescent light bulbs
  • Free-standing electronic appliances
    Computers without modem, table radios, TV sets with rabbit ears Compact fluorescent and modern tube type fluorescent lamps
  • Communications-connected appliances
    Computers with modem, TV with cable or satellite antenna, fax machines, telephone answering/recording machines
  • Signal systems
    Intruder alarms, garage door openers, sprinklers, intercom

Let's then take a quick look at each of these and see which might need some form of surge protection.

Motor-driven appliances and heating appliances

For each of these two categories, there can be two or more kinds, depending on the type of control used.

  • Mechanical control (ON-OFF switch, rotary control, etc.), no sophisticated key pad or other electronic control
  • Electronic control (programmable operation, key pad, display, etc.)

Appliances with mechanical controls are generally insensitive to surges and can be expected to withstand the typical surges that occur in a residence. Extreme cases, such as a direct lightning strike to the building, or one to the utility, very close, might cause damage.

Appliances with electronic controls can be more susceptible to damage than those with mechanical controls. Less traumatic but annoying can be upset memory in programmable appliances, although progress is being made in providing more built in protection.

Another difference to be noted is that of appliances permanently connected, as opposed to those in intermittent use. The risk of a damaging surge happening at the time of intermittent use is much smaller than that of an appliance which is on all the time.

What kind of appliances?

Electronic appliances

Power companies sometimes include as bill stuffers the suggestion to disconnect your appliances when a severe lightning storm is approaching. But that is no help if you are not in the house at that time. If, on the other hand, you are in the house, pulling out the power cord of an appliance that remains connected to a telephone line or cable TV might not be the best idea: you would lose the grounding of the appliance normally done by the power cord - possibly a safety problem should a surge come upon the telephone or cable TV.

This information should help you make the choices that fit your needs for surge protection. To make the right choice, it is useful to note that there are two types of electronic appliances. For each of these types, a different type of surge protector might be needed. These types include:

  • Simple, one link connection to power the system
  • Dual connection to both power and communications
One-link connections

Examples of one-link connection of powered electronic appliances include a TV set with "rabbit ears" antenna, a portable radio receiver, a computer with no modem connection or remote printer, a compact fluorescent lamp, etc. In the category of one-link connection we also find an old-fashioned telephone connected only to the telephone system.

Note that most of these have a two prong plug, which is their sole connection to the power system. For the TV set, a simple" AC plug in surge protector on the power cord would be sufficient. For just the Clamp, the cost of a surge protector " would be greater than the cost of simply replacing the lamp, if damaged by a surge -and therefore not be justified.

Two-link connections

This type of appliance is another matter. Typical of these would be a computer with a modem, a video system with cable or satellite link, a phone system directly powered from a receptacle (those with a large adapter plug and a thin cable with jack which goes to the appliance generally have sufficient internal isolation against surges).

The surge problem with this type of appliance is that a surge coming in from one of the two systems -power or communications -can damage the appliance, because of a difference in the voltage between the two systems when the surge occurs. This can happen even when there are surge protectors on each of the systems. Fortunately, you can find a special type of surge protector against the problem, as described next.

Equalizing differences

A simple solution to the problem of voltage differences for two-link appliances is to install a special surge protector that incorporates, in the same package, a combination of input/output connections for the two systems. Each link, power and communications, is fed through the protector which is then inserted between the wall receptacles and the input of the appliance to be protected. This type of surge protector is readily available in computer and electronics stores, and the electrical section of home building stores.

In addition to words on the package, it can be recognized by the presence of either a pair of telephone jacks or video coax connectors in addition to the power receptacles. Some models might have all three in the same package. Do note a few words of caution: (1) Read carefully the instructions or markings to find which is "in" and which is "out" for the telephone wires. It is important to note, before you buy the product, whether your wall receptacles are wired for three-prong power cords. Some of these combined protectors might not work very well if plugged into a 2-blade receptacle, using a "cheater" plug. (On some, an indicating light will signal that.)

Not just power-line surges

Among other disturbances on the power lines, there was a brief mention of sags and outages. You are certainly and unhappily well- acquainted with outages that can occur for any number of reasons beyond the control of your utility. Sags -a brief decrease of the line voltage -can be more subtle and do occur more often than the complete outage. You will notice these when the lights dim momentarily, digital clocks or VCR controls blink, or your computer shuts down then reboots -possibly losing some data.

Industrial and commercial users, health-care facilities and other critical systems have for many years used a device called "uninterruptible power supply" (UPS) that provides continuous power across a sag, or for the first portion of an extended outage (an independent local power generator set can then kick in).

The aggravation of consumers caused by sags and outages has created a mass market for consumer applications, making them affordable when looked at as protection against these annoying (but not damaging) disturbances -and with built in surge protection as a bonus in many cases. These consumer type UPSs have a small battery which is sufficient to ride through any sag and short outages. Some models even include the software to make a computer shut down in an orderly sequence in case of a long outage.

Surges in other systems

So far, we have looked at surges on the power line alone, or on a combination of power and communications lines. Surges of a slightly different kind can also happen in parts of other electrical systems that do not directly involve a power line. Examples of these are: the antenna for a remote garage door opener, the sensor wiring for an intrusion alarm system, the video signal part of a satellite dish receiver. Surges in these systems are caused by nearby lightning strikes.

These other systems just mentioned have not been the subject of standards on surge protection as much as power and telephone systems. Furthermore, protective devices for these other systems are not as readily available to consumers. It is more difficult to offer well-defined guidance on surge protection for these systems. Applying preventive surge protection schemes to an existing system might be difficult when the sensitivity of such a system to surges is not known. When considering installation of a new system, it would be a good idea to ask specific questions on that subject before signing the contract.

Protection for other systems

Some codes or practices aimed at providing safety for persons, when they are correctly applied, can also provide some equipment protection.

For instance, the general practice of telephone companies is to provide a surge protector as part of their services at the point where the telephone line enters the house (in dense urban environments, the National Electrical Code allows an exception). This protector is known as the "Network Interface Device" (NID) and you will find it on the outside of your house.

Another example of code requirement is that of cable TV systems for which the National Electrical Code requires proper safety-oriented grounding practices. The problem, however, is that in some cases, the video equipment can still be damaged by voltage differences.

With the increasing popularity of small-dish satellite receivers, installation by the user as do-it-yourself has also increased. Typical instructions for installation show how to make the connections, for instance in the figure at right. What the figure does not show is the need to provide a combined protector for power, telephone, and cable.

A well pump installed outside the house presents a double challenge: protection the pump motor itself against surges, and protection the house wiring against surges that might enter the house by the line that powers the pump. The first protection is generally built-in for modern submersible pumps. The second protection should be provided by surge protector installed at the point where the power line to the pump leaves the house, using protectors similar to those applied at the power line service entrance.

Intruder alarm systems using wires between sensors and their central control unit can be disturbed -and damaged in severe cases -by lightning striking close to the house. The wires necessary for this type of installation extend to all points of the house and act as an antenna system that collects energy from the field generated by the lightning strike, and protection should be included in the design of the system, rather than added later by the owner. Wireless systems are less sensitive than wired systems.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 Mistakes To Avoid When Trading Up to a Larger Home

by Dan Groteboer

6 Mistakes To Avoid When Trading Up to a Larger Home


".....you have to sell your present home at exactly the right time in order to avoid either the financial burden of owning two homes or, just as bad, the dilemma of having no place to live during the gap between closings...."


Unlike the experience of buying a first home, when you’re looking to move-up, and already own a home, there are certain factors that can complicate the situation. It’s very important for you to consider these issues before you list your home for sale.

Not only is there the issue of financing to consider, but you also have to sell your present home at exactly the right time in order to avoid either the financial burden of owning two homes or, just as bad, the dilemma of having no place to live during the gap between closings.

Six Strategies

In this report, we outline the six most common mistakes homeowners make when moving to a larger home. Knowledge of these six mistakes, and the strategies to overcome them, will help you make informed choices before you put your existing home on the market.

1. Rose-colored glasses

Most of us dream of improving our lifestyle and moving to a larger home. The problem is that there's sometimes a discrepancy between our hearts and our bank accounts. You drive by a home that you fall in love with only to find that it's already sold or that it’s more than what you are willing to pay. Most homeowners get caught in this hit or miss strategy of house hunting when there's a much easier way of going about the process. For example, find out if your agent offers a Buyer Profile System or House-hunting Service, which takes the guesswork away and helps to put you in the home of your dreams. This type of program will cross match your criteria with ALL available homes on the market and supply you with printed information on an ongoing basis. A program like this helps homeowners take off their rose-colored glasses and, affordably, move into the home of their dreams.

2. Failing to make necessary improvements

If you want to get the best price for the home you're selling, there will certainly be things you can do to enhance it in a prospective buyer's eyes. These fix ups don't necessarily have to be expensive. But even if you do have to make a minor investment, it will often come back to you ten fold in the price you are able to get when you sell. It's very important that these improvements be made before you put your home on the market. If cash is tight, investigate an equity loan that you can repay on closing.

3. Not selling first

You should plan to sell before you buy. This way you will not find yourself at a disadvantage at the negotiating table, feeling pressured to accept an offer that is below market value because you have to meet a purchase deadline. If you've already sold your home, you can buy your next one with no strings attached. If you do get a tempting offer on your home but haven't made significant headway on finding your next home, you might want to put in a contingency clause in the sale contract which gives you a reasonable time to find a home to buy. If the market is slow and you find your home is not selling as quickly as you anticipated, another option could be renting your home and putting it up on the market later - particularly if you are selling a smaller, starter home. You'll have to investigate the tax rules if you choose this latter option. Better still, find a way to eliminate this situation altogether by getting your agent to guarantee the sale of your present home (see point number 5 below).

4. Failing to get a pre-approved mortgage

Pre-approval is a very simple process that many homeowners fail to take advantage of. While it doesn't cost or obligate you to anything, pre-approval gives you a significant advantage when you put an offer on the home you want to purchase because you know exactly how much house you can afford, and you already have the green light from your lending institution. With a pre-approved mortgage, your offer will be viewed far more favorably by a seller - sometimes even if it's a little lower than another offer that's contingent on financing. Don't fail to take this important step.

5. Getting caught in the Real Estate Catch 22

Your biggest dilemma when buying and selling is deciding which to do first. Point number 3 above advises you to sell first. However there are ways to eliminate this dilemma altogether. Some agents offer a Guaranteed Sale Trade-Up Program that actually takes the problem away from you entirely by guaranteeing the sale of your present home before you take possession of your next one. If you find a home you wish to purchase and have not sold your current home yet, they will buy your home from you themselves so you can make your move free of stress and worry.

6. Failing to coordinate closings

With two major transactions to coordinate together with all the people involved such as mortgage experts, appraisers, lawyers, loan officers, title company representatives, home inspectors or pest inspectors the chances of mix ups and miscommunication go up dramatically. To avoid a logistical nightmare ensure you work closely with your agent.

How To Refinance When Your Home Is Underwater

by Dan Groteboer
Posted: 13 Mar 2010 05:46 AM PST
Making Home Affordable logo
The Federal Housing Finance Agency has extended the government’s Home Affordable Refinance Program by 12 months.
HARP’s new end date is June 30, 2011.
Originally known as Making Home Affordable, HARP aims to help Arizona homeowners refinance their mortgage who may otherwise be ineligible because of falling home values.
There are 4 basic HARP criteria every borrower must meet:
  1. The existing home loan must be guaranteed by Fannie Mae or Freddie Mac.
  2. Your home must be a 1- to 4-unit property
  3. You must have a perfect mortgage payment history going back 12 months. No 30-day lates allowed.
  4. Your first mortgage balance must be 125% or less of your home’s market value
If you’re not sure whether Fannie Mae or Freddie Mac back your mortgage, you can look it up. Fannie’s website is http://www.fanniemae.com/loanlookup; Freddie’s is http://freddiemac.com/mymortgage.  If you don’t locate your loan on either website, your mortgage is backed by a third-party and is not HARP-eligible.
For homeowners that meet HARP’s criteria, there are some underwriting details of which to be aware.
First, if your original mortgage does not require mortgage insurance, your HARP mortgage will not require it, either — regardless of your new loan-to-value.
Second, all HARP refinances require income verification. It doesn’t matter if your original mortgage was a stated income or no income verification loan. You should expect to produce 1040s and W-2s for your HARP refinance and asset statements, too.
And, lastly, second (and third) mortgages may not be “rolled in” to a new first mortgage loan balance. Junior lien holders must agree to remain in a junior lien position, regardless of combined loan-to-value.
There is a thorough HARP FAQ section on the government’s website, but it’s for general questions only. For specific Home Affordable Refinance Program information, first make sure you’re program-eligible, then pick up the phone to call your loan officer.
 
HARP is complex enough that you’ll want to talk with a human before taking a proper next step.

Fixing Up Your Home: Protect Your Housing Investment

by Dan Groteboer

Fixing Up Your Home: Protect Your Housing Investment

Your home is an investment in living as well as in savings. If neglected, it will pay no dividends. If properly maintained and improved, it will pay a high yield in comfort and usefulness for your family and in avoidance of costly repair bills. Home improvements also tend to raise neighborhood standards and, as a result, property values. From an economic standpoint, home improvements mean higher employment, increased markets for materials and home products--and therefore a more flourishing community. 

If You Do It Yourself 

If you are handy with tools and have the experience, you can save money by doing many jobs yourself. But unless you are skilled in wiring, plumbing, installing heat systems, and cutting through walls, you should rely on professionals for such work. 

When you buy the required materials, it pays not to skimp. Good materials are not necessarily the most expensive. What you need are products that look good, are easy to maintain, and last a long time. Buy only from reliable dealers. 

If You Use a Contractor 

If you plan to use the services of a dealer or contractor, take care to choose one with a reputation for honesty and good workmanship. There are several ways to check on a contractor: 

  • Consult your local Chamber of Commerce, the Better Business Bureau, or Local Consumer Protection Agency.
  • Talk with people for whom he has done work. 
  • Ask your lender about him, if you plan to finance the project with a loan. 
  • Check his place of business to see that he is not a fly-by-night operator. 
  • Find out, if you can, how he rates with known building-product distributors and wholesale suppliers. 
  • Ask friends and relatives for names of firms that they could recommend. 
Compare Contractor Offers 

Before deciding on a contractor, you may want to get bids from two or three different firms. Make sure that each bid is based on the same specifications and the same grade of materials. If these bids vary widely, find out why. 

Many contractors offer package plans that cover the whole transaction. Under such a plan the contractor provides all materials used, takes care of all work involved, and arranges for your loan. 

Your contractor can make the loan application for you, but you are the one who must repay the loan, so you should see that the work is done correctly. 

Understand What You Sign 

The contract that both you and the contractor sign should state clearly the type and extent of improvements to be made and the materials to be used. Before you sign, get the contractor to spell out for you in exact terms: 

  • How much the entire job will cost you. 
  • How much interest you will pay on the loan. 
  • How much you will pay in service charges. 
  • How many payments you must make to pay off the loan, and how much each of these payments will be. 

After the entire job is finished in the manner set forth in your contract, you sign a completion certificate. By signing this paper you certify that you approve the work and materials and you authorize the lender to pay the contractor the money you borrowed. 

Beware of Fraud 

Most dealers and contractors conscientiously try to give their customers service equivalent to the full value of their money. Unfortunately, home improvement rackets do exist. Here are a few common sense rules to follow: 

  • Read and understand every word of any contract or other paper before you sign it. 
  • Never sign a contract with anyone who makes fantastic promises. Reputable dealers are not running give-away businesses. 
  • Avoid wild bargains. The best bargain is a good job. 
  • Never consolidate existing loans through a home improvement contractor. 
  • Do not let salespeople high-pressure you into signing up to buy their materials or services. 
  • Be wary of salespeople who try to scare you into signing for repairs that they say are urgent. Seek the advice of an expert as to how urgent such repairs are. High-pressure and scare tactics are often the mark of a phony deal. 
  • Avoid salespeople who offer you trial purchases or some form of bonus, such as cash, for allowing them to use your house as a model for any purpose. Such offers are well-known gimmicks of swindlers. 
  • Never sign a completion certificate until all the work called for in the contract has been completed to your satisfaction. Be careful not to sign a completion certificate along with a sales order. 
  • Proceed cautiously when the lender or contractor demands a lien on your property.

 

 

 

 

 

 

 

 

 

 

Getting Your Home Ready

by Dan Groteboer

Getting Your Home Ready

INSIDE 

CLEAN!  CLEAN! – Have the carpet shampooed; wax the floors, wash the walls, windows, blinds, drapes and lighting fixtures.  Consider engaging a cleaning service, recognizing that it is a justified moving expense.

KITCHEN AND BATHROOMS – Clear off counter tops.  Leave your canisters and little else.  Maximize the available counter space.  These rooms should be gleaming.  If unsightly, have the tub re-caulked and remove mineral deposits and grime from the shower walls.  Clean the stove, microwave and refrigerator.

PRIMARY STORAGE AREA – like the garage, its time has come to be liberated.  Remember, you can do it now and benefit with a more attractive home on the market, or you can do it several months from now, in the process of moving when there is no advantage.  Do it now.

REPAIRS – Identify and repair dripping faucets, sticking or creaking doors, etc. 

When people see areas of disrepair they begin to wonder whether there may be other unseen problems. 

CLOSETS – Remove out of season clothing.  Organize your clothing and the shoes on the floor.  Remove all clutter from cabinets and closets.

FURNITURE – The less furniture, the larger a room appears to be.

A LIGHT APPEARANCE – As a rule, do everything to lighten the appearance of the home.  Raise the blinds, open the drapes and use light colors.  Repaint any room beginning to look shabby.

OUTSIDE 

Walk the property with a pad and pencil. List anything that you think is less than satisfactory without regard to cost or time.  You can review the list afterwards to determine what you can and can’t repair.

THE HOUSE – Take a close look as you walk the property.  Clean anything that looks unkempt or dirty; repair or replace anything that looks loose, dingy, rusted or broken.  Make sure the door bell works.  Replace a tired-looking mailbox; clean the exterior light fixtures and wash the windows.  Try to spot hanging or rusty gutters, crooked antenna, loose shingles or shutters.

THE YARD – Turn and weed the beds; trim the trees and shrubs.  Lay in ground cover.  Mend the fence, fix the gate latch.  Pick up litter.  Consider a landscaping/lawn service. 

OUTDOOR FURNITURE – Examine and spot paint your out door furniture.  If it’s rusty or un-repairable consider disposing of the pieces. 

FRONT ENTRY – It’s the first thing our buyers see as they stand and wait for the door to open.  It’s worth the extra effort to spruce it up.

THE GARAGE – The time has come.  Discard virtually everything in the garage that hasn’t been used for a year.  Wash it down.

NOTE:  Think in terms of a home that is sparkling clean and uncluttered.

Take advantage of the tools on my website, ie: using the search tools, buyer and seller information, etc.

Tax Credits Provide Outstanding Opportunities for Home Buyers

by Dan Groteboer

The Worker, Homeownership, and Business Assistance Act of 2009 has extended the tax credit of up to $8,000 for qualified first-time home buyers purchasing a principal residence. It also authorized a tax credit of up to $6,500 for qualified repeat home buyers.

www.federalhousingtaxcredit.com/

Please feel free to give me a call at 507.254.0957 if you have any questions.

 

Why It Is So Important That Your Home Is Correctly Priced and Marketed Properly


"...you need to beware of agents who set the list price on homes at unrealistically high levels simply to get listings..."


While many agents may promise to sell your home for the money you want, the reality of the real estate market today is that this simply doesn't always happen. The fact of the matter is, the majority of homes sell for a price which falls short of what sellers may have been lead to believe.

There are two factors at play here. On the one hand, you need to beware of agents who set the list price on homes at unrealistically high levels simply to get listings. This is really unfair because it can set homeowners up for disappointment and failure.

On the other hand, you have homes that are priced correctly, but are marketed ineffectively. Without a proper marketing program in place to ensure a home is exposed to the highest number of qualified buyers, many homesellers feel forced to accept a lower offer.

There's nothing worse to a homeseller than to have their home sit unsold for many months because of improper pricing and/or marketing techniques. Needless to say, either of these situations is highly frustrating to any homeseller. But more than that, it can be financially crushing if you're counting on the full proceeds of the sale of your home to fulfill some other obligation.

To prevent this scenario when selling your home here are some points to consider before choosing the agent you want to represent you.

Deciding Upon an Agent

A good agent knows the market and has information on past sales, current listings, a marketing plan, and will provide their background and references. Evaluate each candidate carefully on the basis of their experience and qualifications.

Are they pricing your home correctly?

Home prices are determined by the marketplace not by your emotional attachment or by what you feel your home is worth. You should work closely with an agent who will suggest establishing a realistic price for your home. They will help you to objectively compare the price, features and condition of all similar homes in both your neighborhood and other similar ones which have sold in recent months. It is also important to be familiar with the terms of each potential sale. Terms are often as important as price in today's market.

Do they set themselves apart from the others by offering innovative marketing plans to sell your home fast and for top dollar?

Will they set up an aggressive marketing program to ensure your home is exposed to hundreds of qualified buyers? How much money does this agent spend in advertising the homes s/he lists versus other agents. In what media do they advertise, (newspaper, magazine, TV. etc.) Do they use a 24 hour hotline, "For Sale" signs, lock boxes, a Tour of Homes program, and Talking House signs and transmitters? What does this agent know about the effectiveness of one medium over the other?

Extended Homebuyer Tax Credit 2009/2010

by Dan Groteboer

Who Qualifies for the Extended Credit?

  • First-time home buyers who purchase homes between November 7, 2009 and April 30, 2010.
  • Current home owners purchasing a home between November 7, 2009 and April 30, 2010, who have used the home being sold or vacated as a principal residence for five consecutive years within the last eight.

To qualify as a “first-time home buyer” the purchaser or his/her spouse may not have owned a residence during the three years prior to the purchase.

If you or your client purchased a home between January 1, 2009 and November 6, 2009, please see:
2009 First-Time Home Buyer Tax Credit.

Which Properties Are Eligible?

The Extended Home Buyer Tax Credit may be applied to primary residences, including: single-family homes, condos, townhomes, and co-ops.

How Much Is Available?

The maximum allowable credit for first-time home buyers is $8,000.

The maximum allowable credit for current homeowners is $6,500.

How is a Buyer's Credit Amount Determined?

Each home buyer’s tax credit is determined by two additional factors:

  1. The price of the home.
  2. The buyer's income.

Price

Under the Extended Home Buyer Tax Credit, credit may only be awarded on homes purchased for $800,000 or less.

Buyer Income

Under the Extended Home Buyer Tax Credit, which is effective on November 7, 2009,  single buyers with incomes up to $125,000 and married couples with incomes up to $225,000—may receive the maximum tax credit.

These income limits have changed from the 2009 First-Time Home Buyer Tax Credit limits. If you or your client purchased a home between January 1, 2009 and November 6, 2009, please see 2009 First-Time Home Buyer Tax Credit.

If the Buyer(s)’ Income Exceeds These Limits, Can He/She Still Get a Credit?

Yes, some buyers may still be eligible for the credit.

The credit decreases for buyers who earn between $125,000 and $145,000 for single buyers and between $225,000 and $245,000 for home buyers filing jointly. The amount of the tax credit decreases as his/her income approaches the maximum limit. Home buyers earning more than the maximum qualifying income—over $145,000 for singles and over $245,000 for couples are not eligible for the credit.

Can a Buyer Still Qualify If He/She Closes After April 30, 2010?

Under the Extended Home Buyer Tax Credit, as long as a written binding contract to purchase is in effect on April 30, 2010, the purchaser will have until July 1, 2010 to close.

Will the Tax Credit Need to Be Repaid?

No. The buyer does not need to repay the tax credit, if he/she occupies the home for three years or more. However, if the property is sold during this three-year period, the full amount credit will be recouped on the sale.

Displaying blog entries 11-20 of 61

Syndication

Categories

Archives

 

Licensed in the State of Minnesota